The resurrection of Tufftee - Part Deux :o

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A few piccies showing Bulkhead/passenger footwell after welding in (most of it), cleaning up and a coat of paint....

NS footwell horizontal outside repair primed.JPG
NS footwell vertical primed.JPG
NS inside footwell primed.JPG
NS inside footwell vertical primed.JPG


This needs a bit of panel beating to flatten the join.
NS side footwell repair outside.JPG


Am very pleased with the A Post repairs - both inside and out.....
NS A post inner primed.JPG

NS A Post outside repair primed.JPG

Almost impossible to tell it has been repaired. :)

found a couple of pinholes - just to keep @dieseldog69 on his toes :D
 
Last edited:
We'll get that big clamp on that A post and foot well tomoz, get it tacked up and blazed in and it'll be golden.

While I'm up to my eyes in indoor fireworks, do you wanna get that inner wing drilled and ready for test fitting?

Progress is progress :)
 
We'll get that big clamp on that A post and foot well tomoz, get it tacked up and blazed in and it'll be golden.

While I'm up to my eyes in indoor fireworks, do you wanna get that inner wing drilled and ready for test fitting?

Progress is progress :)
inner wing is all ready for first fit ;)
need to attach that small bracket between the bulkhead and the bulkhead body mount.
also one or two areas to flash a weld across where its been ground back.
 
Cleaned up and Kurusted the welding from last night. Pics to follow, however I did find some porn for @dieseldog69 ;)

View attachment 162973

All dressed up it leaves everything to the imagination :)

I was looking at wheels and axles when I was in Machine Mart the other night LOL, I can really see it coming together, just need to "borrow" a trolley now LOL :)
 
Back
Top