The '98 300tdi with 62000 miles

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Jonnygearbox

Active Member
Posts
200
Since the week the land rover was bought (over a year ago now) a general clean up was given to it, but it never was good enough, so after a galvanised chassis, respray, poly bushes and some preventative maintenance it seems to be getting there. BTW it also has a jaguar dual horn instead of the little bamp bamp horn it used to have.

Here are a few pictures of how it sits now. Enjoy

101_0101.jpg

101_0104.jpg

101_0106.jpg

101_0107.jpg

101_0108.jpg

101_0109.jpg

101_0110.jpg

000_0001.jpg

101_0119.jpg

101_0120.jpg

101_0112.jpg

101_0111.jpg

101_0116.jpg

101_0115.jpg

101_0114.jpg
 
Yes indeed it does go up hills, it is not used for laning but it is used for shooting and driving up fields/hills to get to certain hunting grounds :)
 
Top job she is a beauty !! You might want to invest in a quick release steering wheel!!!
Hard to steal it without a steering wheel!! Saved my own Landy from scumbags twice now!!!
 
I forgot to add, this is the vehicle in this months land rover monthly magazine getting a chassis swap. it was also in last months aswell :)
 
believe it or not it was covered in the stuff before i washed and dryed it :) btw im a trained detailer so she is kept in order :)

i forgot to add poly bushes where added but because i did not have any black paint left the arms where just cleaned up from the crust of rust and they need to be taken back out and given another go over with the wire wheel before they are primed and sprayed black :)

but once that is done ill add more pictures to the thread :)
 
Last edited:
believe it or not it was covered in the stuff before i washed and dryed it :) btw im a trained detailer so she is kept in order :)

i forgot to add poly bushes where added but because i did not have any black paint left the arms where just cleaned up from the crust of rust and they need to be taken back out and given another go over with the wire wheel before they are primed and sprayed black :)

but once that is done ill add more pictures to the thread :)

In that case I will bring mine to you for a good going over
 
little update, the axels and things underneath with be cleaned from waxoyl and then it will be getting painted up to stop the rust coming through and to make it nice looking underneath
 
Back
Top