Sorry yes map sensor is doing something when engine is under load. Trying to get another temp sensor today. Could this cause the other temp sensor not to work? The diag I have is a snap on solus pro. I need someone with the nanocom but can't find anyone with it. Cheers
temp sensor which one?
- Thread starter paulcl09
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
On a Nanocom you get all the EDC live data. Manifold pressure, timing modulation, set point and actual. You really do need to find someone with a Nanocom. Life will be so much easier.
Hi I got my power back it was a dodgey wire on the injector with the wires. I just need a box now. Thanks very much for your help.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,888
- Location
- Buckinghamshire, UK. ('95 DT)
Number 4 injector. Pricey!
I didn't need a new one. It was just the connection to the loom. Cleaned and tightend the connections and it was fixed.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,888
- Location
- Buckinghamshire, UK. ('95 DT)
Result.
Just want to do the box now. And sort the oil leak from the oil filter housing are. This poor thing has been bodged badly. But I'm getting there slowly.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,888
- Location
- Buckinghamshire, UK. ('95 DT)
James Martin is the gearbox guru. Oil filter might just be an o-ring if you're lucky (again).
Unfortunately not the sprag clutch has gone so I have to start in 1st every time it still drives tho lol
