Tdi 300 - new con rods for my 1995 engine - which side is the number on the conrods ?
- Thread starter JonatanH
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 3,892
I don't think it makes any difference as the rods are symetrical, the main consideration is that the pistons all wiegh the same (+/- 1g) and they are the right way around (arrow to the front)
- Posts
- 3,892
Britcyclerider
Well-Known Member
- Posts
- 209
- Location
- Dorset, UK
One million km on standard bores is impressive! A true tribute to Tdis!
Was it smoking, hence the piston replacement?
Was it smoking, hence the piston replacement?
- Posts
- 3,892
35,714 km a year (22,300 miles)... 85 miles every working day.
What has the car been doing ?
What has the car been doing ?
I had 620,000km (385k miles) on my 200tdi before the fire and it was showing no adverse signs of wear in its running. As long as they are maintained a tdi truly will go on forever. And when they do need some work as the OP is doing they are easy enough to rebuild.
Yes, it was smoking, especially the first 15-30 minutes. after opening the engine it seems only one piston had a problem but I replaced all the four.
Attachments
True calculation. I am the only driver all those years. Some years +50,000 km and some less. A lot of trips and working all over my small country (Israel), even one big trip to the Jordanian deserts (Petra, Wadi Ram). 35,714 km/year it's only 100 km per day - its not much. The engine temperature was normal all those years - due to daily care. my son wants to keep drive the defender for the next 30 years...
- Posts
- 3,892
That is excellent ....
I went through the Al-Siq many years ago when I was at Kibbutz Grofit - fond memories.
Good luck with the build ... we like pictures here
I went through the Al-Siq many years ago when I was at Kibbutz Grofit - fond memories.
Good luck with the build ... we like pictures here
