td5 trouble fires rough then conks out please help.

fennell · Feb 9, 2014

hi all
i have done some work on my td5 i changed the injector seals and washers, fuel regulator, fuel pump, crank sensor, fuel filter, air bleed valve and injector harness. i took it in to do this as it was rough starting and was told it was the injector seals. now i have done all this it starts and struggles to run for a few moments then conks out i have tried all ways to bleed and even towed it, any advice on this would be much apreciated many thanks.
matt

fennell · Feb 10, 2014

Hi
forgot to add its a discovery . Also if the injector valves arent adjusted correctly would this make it happen
cheers
matt

DIFFLOCK66 · Feb 10, 2014

No idea, sorry, but have you tried posting this in the Discovery section?

fennell · Feb 10, 2014

hi
no mate i will repost it there now i didnt see a discovery section last night lol cheers

ratty · Feb 10, 2014

fennell said:
Hi
forgot to add its a discovery . Also if the injector valves arent adjusted correctly would this make it happen
cheers
matt

if the injector ports weren't cleaned properly or if non genuine parts were used it is highly likely the fault is still the injector washers.

td5 trouble fires rough then conks out please help.

fennell

Member

fennell

Member

DIFFLOCK66

Well-Known Member

fennell

Member

ratty

I'm not special I'm limited edition

Similar threads