Td5 rear door

is the defender td5 rear door the same as the 200tdi rear door? Are the door cards the same.

Got offered a cheap cheque plate door card replacement but it's off a td5...

How cheap is cheap?

Did you get sorted with your door card? Do you ever drive down in to Northumberland? I've got a chequer plate door card, but I'm a long way from you, so probably not worth it depending on how much you are paying for the TD5 one.

Al2O3 said:

Did you get sorted with your door card? Do you ever drive down in to Northumberland? I've got a chequer plate door card, but I'm a long way from you, so probably not worth it depending on how much you are paying for the TD5 one.

Click to expand...

Hi mate, it was £40 with a fold down table as part of it. Didn't go for it in the end.

I do often drive down south so I'll let you know next time I do. If you've still got it I'll take it off your hands!

No fold down table on mine. Just a standard chequer plate door card. It was fitted to my 96 plate 90 until the rebuild, then I bought an ABS replacement. I'll take a piccy if you want. Was going to stick it on ebay, but it's yours if you want it.

Found a picture in my rebuild pictures. This is it in place, just before I took my Landy apart.

Is this what you had in mind?

Al2O3 said:

Found a picture in my rebuild pictures. This is it in place, just before I took my Landy apart.

Is this what you had in mind?

Click to expand...

That's the one! How much were you after for it? (Ps sorry for late reply - I blame the eggnog)

payydg said:

That's the one! How much were you after for it? (Ps sorry for late reply - I blame the eggnog)

Click to expand...

No worries about late reply. Not after money. You can pick it up next time you're travelling through Northumberland or, if you prefer, PM me you're address and I'll post it.

Al2O3 said:

No worries about late reply. Not after money. You can pick it up next time you're travelling through Northumberland or, if you prefer, PM me you're address and I'll post it.

Click to expand...

Thanks mate, will check with the missis on when we might be heading down

I made me own out of a bit of alloy I blagged.

Flossie said:

I made me own out of a bit of alloy I blagged.View attachment 114580

Click to expand...

That's identical to mine!
Well done, Flossie. Doesn't get any better than that, especially as you blagged the plate.

Flossie said:

I made me own out of a bit of alloy I blagged.View attachment 114580

Click to expand...

I made my own too. Buts it's a bit rough round the edges and has taken a bashing. Time to replace