Beardyvaper-td5
Member
- Posts
- 21
- Location
- Warwickshire
So i havent been on for a while, For those of you that were aware or remember my post, about my D2 Td5 non starter.
I GOT IT RUNNING!!
So after fitting nearly £2k in parts alone (Granted most of the stuff i replaced was worn/not working so justifiable money) I got it going.
Turned out to be bad injector seats! recut the seats with new washers and bingo, all sorted! Got it going about a year ago now and the MOT Test has just expired! So now to begin to repair the stuff that i know needs doing before i even consider putting it in for another test haha
First port of call is the sills that look like they belong to a colander
So in the process of getting ready to weld on some Box section sills in place of the standard ones
I GOT IT RUNNING!!
So after fitting nearly £2k in parts alone (Granted most of the stuff i replaced was worn/not working so justifiable money) I got it going.
Turned out to be bad injector seats! recut the seats with new washers and bingo, all sorted! Got it going about a year ago now and the MOT Test has just expired! So now to begin to repair the stuff that i know needs doing before i even consider putting it in for another test haha
First port of call is the sills that look like they belong to a colander
So in the process of getting ready to weld on some Box section sills in place of the standard ones
