Hi
Can anyone help, had problems with disco mk2 Td5 (2000) for a couple of months now. Started by losing power and engine management coming on, turned engine off and restarted and set of again ok for a couple hundred yards, ended up being towed home. Had a look at ECU and it had oil in it, cleaned with brake cleaner and put back on but still same problem, replaced wiring loom, still no better so sent ECU off to be tested, was told that it was oil contaminated and charged £480 for a reconditioned one with recode. Put this on started great got a mile down the road and loss of power again engine still ticks over but no power, checked fuse board this did have a bit of oil in it but not much,and have cleaned it. Any ideas on what to check next
Can anyone help, had problems with disco mk2 Td5 (2000) for a couple of months now. Started by losing power and engine management coming on, turned engine off and restarted and set of again ok for a couple hundred yards, ended up being towed home. Had a look at ECU and it had oil in it, cleaned with brake cleaner and put back on but still same problem, replaced wiring loom, still no better so sent ECU off to be tested, was told that it was oil contaminated and charged £480 for a reconditioned one with recode. Put this on started great got a mile down the road and loss of power again engine still ticks over but no power, checked fuse board this did have a bit of oil in it but not much,and have cleaned it. Any ideas on what to check next
