Disco 2 TD5 issue

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Henry_b

Think outside, no box required.
Posts
15,509
Location
somewhere else
As per usual i replace some parts and it bites me in the balls.

This time the Injector harness was replaced along with the front cam seal.
everything was cleaned out etc "it was full of oil" #

now under hard revs it breaks up and smokes like a banchee, if you leave it to idle for a little while it burns the oil off and runs ok..

Try to give it the knackers again and it smokes and runs on 2-3 cylinders!

AHHHHHHHHHHHHHHHHHHHHHHHHHHHH ;)



Not the best angle but the blue smoke cloud behind is quite funny!!

LOL
 
have you fitted the new harness fully to each injector and why did you change it and was it a cheap one
Hiya JM.

It was a Bearmach one i panic ordered, it seemed good quality, it was the same as the one on the car, i'm assuming on 185k it's on the 2nd or 3rd one by now.

The connectors were pushed home fully.
:D
 
did it run alright with the old harness if so refit and try again
It started to Buck and Misfire, i assumed the old one was full of Oil, and it was..
x9POxLIl.jpg


Video here.



It doesn't buck in gear anymore just misfires and smokes when the pedal is buried!
 
Back
Top