TD5 Gear box oil HELP!
- Thread starter John03
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
we even took the bleed nipple right out of the slave cylinder and no fluid came out.
Did you try poking anything in the hole when you took the bleed screw out?
Cheers
Did you try poking anything in the hole when you took the bleed screw out?
Cheers
Last edited:
yup we tried that too, kept pumping the clutch but no fluid came out, but the gears are now working?
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
There must be fluid there. When you poked whatever in the hole did it go in without a problem?
If as you say you can now drive the vehicle and change gear without a problem.
May be worth looking at a new slave cylinder. Have you opened the bell housing wading plug to see if any fluid comes out?
Cheers
If as you say you can now drive the vehicle and change gear without a problem.
May be worth looking at a new slave cylinder. Have you opened the bell housing wading plug to see if any fluid comes out?
Cheers
yup no resistance what so ever. Not tried doing anything with the bell housing as not sure whats wrong thats why asked on here. If gears are working ok why do you suggest a new slave cylinder?
Then you said "Interesting, I take it you will be changing it when you get the right stuff." when I told you what gearbox oil I brought.
Neilly you seem to say things but not back up what your saying with reasons as to why your saying them, it's almost as if your taken the mick I apologise whole heartily if your not but I'm no mechanic I brought the Landy coz I've always liked them since I was a young lad, and I want to learn how maintain and repair it as much as possible , which is why I joined this forum.
So please be kind and answer my questions
if the gear box is working but I cannot seem to be able to get fluid out the bleed nipple of the slave cylinder why should I be looking to buy a new slave cylinder ? the gears work?
The gear box oil I brought is listed as a direct replacement for the Texaco stuff getting a hold of the Texaco stuff seems to be nigh impossible around here. so what wrong with using the stuff that's been recommended as a replacement?
Thanks for the advice, heated it up a wee bit then using a pair of mole grips gripped the filler plug and with some force it finally came undone. New oil now in the gear box old filler plug in place but not tightened up, just waiting on new plug hopefully arrive Saturday morning .
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
OK, sounds good,
Now , did you empty the old oil out?
Also , the oil you put in, who told you it was the same stuff?
Cheers
Now , did you empty the old oil out?
Also , the oil you put in, who told you it was the same stuff?
Cheers
Really? did I empty the old oil out? thats your question? Well of course I did, I'm not that wet behind the ears.
Several websites listed it as a direct replacement for the Texaco stuff and the car parts shop I ordered it from claims its the same stuff just a cheaper brand. I did ask the question on this forum if it was ok before I ordered it but nobody answered
Last edited:
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
I have answered your questions as far as I am concerned, however I am a great believer in you doing your own homework. ( you can give a man a fish or teach give him the tools and knowledge to fish ) Otherwise you are relying on others to answer questions that you should be able to get the answers to yourself, I did give you the specs to the fluid and quantity that you asked originally.
I personally do not think using the oil you have used is correct , which is why I have asked the question I now have. But as it as upset you. you do not have to feel any reason to answer.
No not upset more annoyed that I may have been misled by local car parts shops as none stocked the Texaco oil and said it would take about a week to order but the Comma stuff I got was correct stuff. Which means I may have to order the correct stuff now and do yet another oil change. Could the oil I put in cause me any problems or damage the gearbox.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
you can use dexron 3 , the box was originally designed using dexron 2,what is vital whichever you use is frequent changing ie once a year
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
box will run on any oil, its the baulk rings that needs a thin vicosity
and if its not the right vicosity, what happens to the baulk rings?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
they wear ,dexron 3 should be available everywhere its a common power steering and auto fluid
the guy in Eurocar parts recomended the comma stu
it was out of stock too or so i was told. cant move it anyway until I get a new filler plug, and also I notice the manual says to replace the drain plug washer, it did not have one, so will need to order one so to fit it I'm gonna need to empty it again anyway.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
ftc4112 is the drain plug washer, if you have a rag to push over the hole you wont lose all of it, though a washer can be used more than once as long as it doesnt leak
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
You can get MTF94 delivered via amazon or bay of flea.
I dont do the bay of flea and I'm looking on Amazon as I'm typing on here and the Texaco stuff is not appearing only equivalent stuff
Similar threads
