TD5 CB problems

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

Tinweasel

New Member
Posts
7
Hi everybody, I have a 2004 90 xs to which I have fitted a midland 98 cb, ehich works fine intill I start the engine, air con, winscreen wipers, well anything that runs on electric then I get so much interferance the cb is unsable in the lower chanels can anybody sugest anything I can do to try and cut this out to give me a few more channels to use?

Many thanks

Shaun
 
You've obviously picked up your power from somewhere under the dash. although normally this doesn't cause problems, try taking the power direct from the +'ive side of the battery (Don't forget you still need the in-line fuse).
The other thing that can cause it, is where you've routed the aerial coax, if that too close to motors etc then it can pick up interference.
 
Thanks for the replys, thats why I'm a little stumped as the power comes from the battery by way of the power point in a mud tray around the gearbox lever, the CB is fitted to the dog guard, and aerial coax runs down the rear ladder, under the rear door and along the passenger side of the rear tub, which is I belive should be free from anything that could corse interferance

cheer

Shaun
 
You must log in or register to reply here.

Similar threads

CRTD5
2011 defender electric windows and central locking
Replies
0
Views
448
CRTD5
CRTD5
CRTD5
Electric windows and central locking
Replies
1
Views
495
Grebby
G
RustHater
Wanted door skin for a Puma/td5 rear (safari) door
Replies
0
Views
1K
RustHater
RustHater
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
4K
Goc3k
Goc3k
VirusWar
Freelander 1 [SOLVED] Electrical problems, possible CCU failure
Replies
9
Views
3K
VirusWar
VirusWar
Back
Top