Td4 wiring harness for cruise control

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
OnTheEdge

OnTheEdge

Member
Posts
18
I've recently become a Td4 HSE (manual) owner. It doesn't have cruise control fitted as standard which is something I would have found very useful.

My previous motor would differ with others of the same model. It didn't have an interior temperature sensor for example. This was an easy fix as the wiring already existed. It was just a case of getting the foil sensor and plugging it in.

My query is. Is it known if all Td4's will have the same wiring harness throughout Td4 range? My immediate thinking is yes. If correct, I'll attempt to add the genuine cruise control kit.

Could anyone shine some light on this.
 
have a look under the drivers seat and there is a slit in the carpet if the wiring for the ecu is there that's where it will be also take the top of your steering wheel (hex bolts)and see if the wiring is there for the control switch also as yours is the hse same as mine it will have the wiring next to the cut off switch for the reverse sensors ,if it has then get a second hand ecu this will work without being programed good luck
 
Done it on mine (manual TD4 HSE '06) soon after we got it (four years now).
It's great for towing and long trips.
Looks standard and works well. :cool2:
From my research - most of the aftermarket kits are the same & made by TDK with different badges.
Don't forget to tell your insurers! :eek:
Some info on what I did.;)
 

Attachments

  • Fun with the wiring on '06 FL.pdf
    39.7 KB · Views: 596
  • MS800 Full Wiring.pdf
    19.3 KB · Views: 396
  • MS800 Interface Mk2a.pdf
    15.3 KB · Views: 362
  • Fitting Cruise Control to TD4.pdf
    1.2 MB · Views: 1,340
Yes I know this is an old thread sorry!!!
I've purchased all the parts but useless with wiring, fancy earning a few quid TD John?
 
Crash_Low said:
Yes I know this is an old thread sorry!!!
I've purchased all the parts but useless with wiring, fancy earning a few quid TD John?
Click to expand...
CC was only an option on auto box FL1s as the gearbox ECU(TCM) forms part of the control system. So unless it's an automatic, it's pointless looking at the OE system.

There aftermarket CC kits available which would come with their own harness anyway. ;)
 
Nodge68 said:
CC was only an option on auto box FL1s as the gearbox ECU(TCM) forms part of the control system. So unless it's an automatic, it's pointless looking at the OE system.

There aftermarket CC kits available which would come with their own harness anyway. ;)
Click to expand...

I think you may have missed the whole wiring up an aftermarket CC kit to oem controls question Nodge ;)
 
You must log in or register to reply here.

Similar threads

J
Freelander 1 Retro fit Cruise Control
Replies
1
Views
801
mbrokof
M
S
Freelander 1 Cruise control retrofit for FL1 TD4 2002 MANUAL gearbox?
Replies
4
Views
932
Sancko
S
S
Freelander 2 (LR2) Brake Pedal Cruise Control Switch
Replies
0
Views
679
Stevelander 2
S
E
Stuck removing brake light switch
Replies
3
Views
367
ellieb99
E
M
Mystery wiring harness after rebuild.
Replies
4
Views
398
MikeyRB
M
Back
Top