tap tap tappets

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Jezath

New Member
Posts
157
Location
cwmavon, port talbot
Hey there guys and gals,

My TD5 engine has an annoying tapping sound that has been diagnosed as the tappets that need adjusting..

Now Ive just had the rocker cover off and have bottomed out the adjusters then given them 360 dergree turn anti clockwise then lock nut tightened without turning the screw..

put it back together but still a tapping sound.... i have access to a feeler gauge, does anyone have the clearance i need handy?? also do i have to adjust anything else below the cam??

Thanks guys

Disco 2 gs 1999 ^TD5
 
Last edited:
the tappets on a td5 are hydrolic, no adjustment is possible it sounds like you adjusted the injectors
 
yeah i think i did, would they cause a tapping sound top end? its had this tapping sound since the head gasket was replaced :S

Could it be anything to do with the injector harness? I pulled out my ecu and the red plug has oil on the outside :S
 
nothing to do with the harness, but if oil in red plug then the harness needs replacing, injector noise sounds like a hollow metalic type of sound, but its hard to describe a sound
 
aye I feared as much, thanks for the confirmation on the harness replacement. This is like a clicking/tapping sound in line with however many revs i have on... seems like Alot of vibration through the whole car also... more than normal..
 
I know this isent a landrover but the noise of tapping is exactly the same....[nomedia="http://www.youtube.com/watch?v=SAF7NP8pakY"]YouTube - Astra sri 2.0 modified but now tappey after head gasket change[/nomedia] Do you think it might be the lifters? should i try seafoam?
 
Last edited:
madhat, not sure if its an injector noise or not, that was an awnser to my question that john posted lol :)

It does however sound exactly like the tapping on that astra
 
sorry - was hijacking yo thread - got a similar noise on my X-T - sounds like a tappet or small end nock - had it for the last 30K miles tho, so it aint serious, just its bugging me ;).
 
no smoke issues at all.... it feels to me like its a little down on power as to how it used to be before the head gasket replacement...

Previous to this replacement of the head gasket the engine sounded wonderful!!
 
thanks guys... first thing first is stick some valve lifter in the oil and see what happens,

Deffo not the pulley damper, ive justreplaced the pulley and damper and front oil seal.. One garage says its the lifters, another says its the followers, another says injector seals.. what a headache.. ill look into manifold gasket etc thanks
 
Back
Top