Suspension fault any ideas

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

bertone902

Member
Posts
78
Location
yorkshire
Afternoon everyone
Loosing the will to live with this f@$%ing car wish id have kept the disco 2 now .
2006 rrs 2.7 110k

Been coming up for a few week with suspension fault in amber .
Code read it a few times and deleted and sometimes it would stay off .
Also when driving the car would sink on one side and i would have to stop turn car off cycle the airsuspension in all heights and it would stay up for ages . Literally weeks apart but sometimes it was just the light that came on .
The code i got is ...
U0434 invalid data recieve from active control module ( active stabilization system )

.. about 20 mins ago i have just clipped a kerb in a housing estate literally bumped up it slowly when turning tight corner . (Not a big kerb pretty much a dropped kerb)

The light has come on red with suspension fault stop safely swich off engine .

The car seemed to go down on the side that bumped the kerb .

code read it straight away and got the following on photos attached . Same fault code .
But i read the live data and attached pics in the hope anyone can help advise on what it could be .
https://ibb.co/mB67MMj https://ibb.co/VWKK9v7 https://ibb.co/DRPSRMN https://ibb.co/TtW65Tx https://ibb.co/CHK5gpP https://ibb.co/x5ftGB0 https://ibb.co/vDnH6r3 https://ibb.co/RhjWYk8 https://ibb.co/4pV0FZx https://ibb.co/y42C36d https://ibb.co/6rwP1c5 https://ibb.co/QJ0JS5K https://ibb.co/88LkDq4 https://ibb.co/hW5JftG https://ibb.co/PhzJnWP https://ibb.co/Dtsvk1C https://ibb.co/FsV2T1Xhttps://ibb.co/mB67MMj https://ibb....https://ibb.co/Dtsvk1C https://ibb.co/FsV2T1X

Any help would be extremely appreciated .

Thanks in advance
 
Just jacked the car up and the re is a huge pool of oil underneath still dripping . No ace fluid in reservoir ..
Had the car in for new d bushes front and back on thursday and on friday morning notice a small spot of oil on the drive . Now its same oil but a lot of it . Its pouring out .

Looks expensive
 
Just jacked the car up and the re is a huge pool of oil underneath still dripping . No ace fluid in reservoir ..
Had the car in for new d bushes front and back on thursday and on friday morning notice a small spot of oil on the drive . Now its same oil but a lot of it . Its pouring out .

Looks expensive
 
Just jacked the car up and the re is a huge pool of oil underneath still dripping . No ace fluid in reservoir ..
Had the car in for new d bushes front and back on thursday and on friday morning notice a small spot of oil on the drive . Now its same oil but a lot of it . Its pouring out .

Looks expensive

hi

just what u need, not, it can be expensive , best to get the garage to have a look , if it’s a new ace roll bar they have to lift the body off slightly

can u see exactly where it’s coming from , was it ok before it went into the garage as I assume if oil had been pouring out they would have told u
 
Ok, you've an oil leak... but from roughly where?

Ace? isn't that Disco 2?

hiya

the RRS has hydraulic anti roll bars which can be expensive ie, some £700 each but seen some that can be reconditioned , to get the rear one out the body needs to be lifted slightly off the body mounts to change them
 
Yeah it was fine before i took it in . I never noticed oil before hand . Just the knocking of the bushes which is why it went in for replacing . I bought some polybushes fitted instead of the standard ones .. from what i can see wothout taking the belly panel off is its dripoing rim the rear of the belly panel . are there any hoses running to and from the rear roll bar and front that could have split ? I know im running on hope here but youn ever know . Wish it eas as easy as the disco 2 roll bar on my old one . Could get it off and swapped within half hour
hi

just what u need, not, it can be expensive , best to get the garage to have a look , if it’s a new ace roll bar they have to lift the body off slightly

can u see exactly where it’s coming from , was it ok before it went into the garage as I assume if oil had been pouring out they would have told u
 
Yeah it was fine before i took it in . I never noticed oil before hand . Just the knocking of the bushes which is why it went in for replacing . I bought some polybushes fitted instead of the standard ones .. from what i can see wothout taking the belly panel off is its dripoing rim the rear of the belly panel . are there any hoses running to and from the rear roll bar and front that could have split ? I know im running on hope here but youn ever know . Wish it eas as easy as the disco 2 roll bar on my old one . Could get it off and swapped within half hour
hi

just what u need, not, it can be expensive , best to get the garage to have a look , if it’s a new ace roll bar they have to lift the body off slightly

can u see exactly where it’s coming from , was it ok before it went into the garage as I assume if oil had been pouring out they would have told u
 
Yeah it was fine before i took it in . I never noticed oil before hand . Just the knocking of the bushes which is why it went in for replacing . I bought some polybushes fitted instead of the standard ones .. from what i can see wothout taking the belly panel off is its dripoing rim the rear of the belly panel . are there any hoses running to and from the rear roll bar and front that could have split ? I know im running on hope here but youn ever know . Wish it eas as easy as the disco 2 roll bar on my old one . Could get it off and swapped within half hour
hi

just what u need, not, it can be expensive , best to get the garage to have a look , if it’s a new ace roll bar they have to lift the body off slightly

can u see exactly where it’s coming from , was it ok before it went into the garage as I assume if oil had been pouring out they would have told u
 
Hi

will have to wait till the forum is sorted out as it’s really slow , as soon as it is will have a proper look
 
That looks a lot of oil, personally wouldn’t start the engine until u know 100% what it is

once the forum is better can then at least have a proper look at all the pics for u
 
Also just quickly , what does ur vin start with please , is it 6A or 7A plse

thks
 
Sorry pal forum keeps crashing . Its 6a buddy

many thks, if it’s jacked up wrong it can put a lot of stress on the hydralic roll bar which blows the seals

if u would be so kind to take some moe pics in the daylight we’re then have a better idea from where it’s leaking from

hopefully a whole roll bar isn’t req as there around £700 , but will know more once we know what’s actually leaking
 
Just a quick update .... rang my local landrover specialist who changed the arb bushes last week .
Took it in at 12pm today and recieved a call from him saying theyve changed the pipe seals or something for the anti roll bar and it seems to have done it . Needs to go for test drive and then he will let me know wither tonight or tomorrow.

Thanks god for that !

He said they have leaked when they were disturbed when they did the d bushes last week .

Fingers crossed after the road test its all good . He said i wouldnt need a full bar kn the phome anyways so all well and good do far
 
Just a quick update .... rang my local landrover specialist who changed the arb bushes last week .
Took it in at 12pm today and recieved a call from him saying theyve changed the pipe seals or something for the anti roll bar and it seems to have done it . Needs to go for test drive and then he will let me know wither tonight or tomorrow.

Thanks god for that !

He said they have leaked when they were disturbed when they did the d bushes last week .

Fingers crossed after the road test its all good . He said i wouldnt need a full bar kn the phome anyways so all well and good do far
 
Back
Top