still white smoke and overheating

sambodisco · Jun 24, 2009

well after i thought all was good after cleaning intercooler & radiator, and hoses, its not, the white smoke has gradually got worse & Temp rises slightly more than usual. but does settle with blowers on full wack.

im going to have my head gasket tested when he comes back off holiday next week, im just wondering if theres anything more to it than meets the eye, i will be doing the job myself in the garage,

ive read alot of threads on here and read the haynes manual lots over and over.

i no i need the new head gasket and head bolts. is there anything else worth getting whilest its all in bits or any little tips u guys have. and do i have to remove the turbo and exhaust manifold ????

ruffday · Jun 24, 2009

While you have it srtipped id change the following.
Water pump, Thermostat, Cam belt and tensioner and check/change any core plugs you can get to.

Richard Martin · Jun 24, 2009

the job is easier if you remove the manifolds, so new gasket will be needed. You could also replace the valve stem oil seals and the rocker gasket while you are at it.

sambodisco · Jun 25, 2009

bloody hell, looks like ive got a job on my hands haha,

Richard Martin · Jun 25, 2009

As well as buying the head gasket you can by a "head gasket set". This will include all the gaskets and things like the copper washers that go under the fuel injectors (I am assumung you have a TDI) apart from the head gasket itself. When you buy the head gasket make sure you get the right one. There are three different thicknesses. The thickness is shown by the number of holes or notches in a tab that sticks out on the left hand side (when stood at the front looking at the engine), check the old one before buying a new one. Once you have the head off it pressure tested and checked for trueness, it may need skimming.

sambodisco · Jun 25, 2009

Richard Martin said:
As well as buying the head gasket you can by a "head gasket set". This will include all the gaskets and things like the copper washers that go under the fuel injectors (I am assumung you have a TDI) apart from the head gasket itself. When you buy the head gasket make sure you get the right one. There are three different thicknesses. The thickness is shown by the number of holes or notches in a tab that sticks out on the left hand side (when stood at the front looking at the engine), check the old one before buying a new one. Once you have the head off it pressure tested and checked for trueness, it may need skimming.

thanks for that mate, thats the only thing i was worrying about. didnt know what head gasket id need. do u know where i can order the gasket kits from mate ?

disconewbie · Jun 25, 2009

Just had a quick look on ebay, check out this link. If it works ?

Land rover discovery head gasket, Vehicle Parts Accessories, Full Gasket Sets items at low prices on eBay.co.uk

Richard Martin · Jun 25, 2009

do u know where i can order the gasket kits from mate ?

Let me google that for you

sambodisco · Jun 25, 2009

thanks for that guys, checked ebay and paddocks just couldnt find the full set. maybe cos i was putting 200tdi full gasket lol. thanks alot folks. !!

sambodisco · Jun 26, 2009

well good news, hd gasket hasnt gone, had it tested today, looks like oil and filter change tomoro, will the moneysaveing morrisons oil be ok ??? as im pretty skint., already got the filter.

still white smoke and overheating

sambodisco

New Member

ruffday

Active Member

Richard Martin

Well-Known Member

sambodisco

New Member

Richard Martin

Well-Known Member

sambodisco

New Member

disconewbie

Member

Richard Martin

Well-Known Member

sambodisco

New Member

sambodisco

New Member

Similar threads