Steering wheel puller

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I've thought about it. If cheap enough and easy enough to purchase I was willing to save myself the bother just this one time :)
 
I had a very tight steering wheel, pulled, beaten, malleted, 200lbs of annoyed gent hanging on it, still no joy. Always suspected the PO had used a clear glue of some sort on the splines.

It even stripped the threads in the steering wheel when I made a heavier duty puller, ended up retapping to iirc M8, then it came off . Comes off nice and easy now I tell you.

Good luck, they can be a PITA at times.

Cheers
 
I think that's the way mine might be going as it doesn't seem to be budging at all.
 
ogb said:
Be interested to hear what works. I need to replace my indicator/flasher switch soon, and I know from previous attempts that the Mallet Method to get the wheel off ain't gonna shift it.
Click to expand...
Steering wheel puller/bearing puller works most of the time, if not, you may need to make your own heavy-duty version and tap the threads on the wheel to take larger bolts, as Neilly has done.
 
You must log in or register to reply here.

Similar threads

tweedandbriar
Td5 Injector Puller / Removal Tool
Replies
1
Views
319
Anaconda
A
J
Stuck Momo steering wheel
2
Replies
38
Views
3K
jwrw
J
Z
What type of fuel pump ?
Replies
5
Views
371
Rangieman123
Rangieman123
chrisstdt
Steering box fault
Replies
2
Views
912
chrisstdt
chrisstdt
J
Engine mounts
Replies
4
Views
229
sierrafery
sierrafery
Back
Top