steering wheel problem

mike polly1 · Mar 3, 2010

changed the steering wheel in my p38 and now the cruz control wont work and none of the buttons on the wheel work .but the switch for cruz on dash lights up .did work fine till i changed it any idea y

Irishrover · Mar 3, 2010

Casette underneath the steering wheel not connected properly or faulty???:behindsofa:

wammers · Mar 3, 2010

mike polly1 said:
changed the steering wheel in my p38 and now the cruz control wont work and none of the buttons on the wheel work .but the switch for cruz on dash lights up .did work fine till i changed it any idea y

Sounds like you screwed up the cassete ribbon coupler. See RAVE for specific instructions how to set this up. If you just took it off and threw it back without setting cassete up you may have broken ribbon, and the units are not cheap.

mike polly1 · Mar 3, 2010

cheers will have a look in morn see whats what

mike polly1 · Mar 13, 2010

sorted out the cruz control problem out found it to be the pipe not connected under bonnet gemsdad and irishrover put me right thanks lads

wammers · Mar 14, 2010

Hell Mike you must have given that steering wheel one hell of a thumping removing it to dislodge a pipe under the bonnet.:doh:

steering wheel problem

mike polly1

New Member

Irishrover

Well-Known Member

wammers

No longer with us, RIP

mike polly1

New Member

mike polly1

New Member

wammers

No longer with us, RIP

Similar threads