steering box adjustment
- Thread starter Lyndon
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
6mm or should be
Thanks James, it looks like someone has previously mashed it then as my 6 mm is to small and 8mm is to big.
Is it difficult to change/ remove the grub screw?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
its part of sector shaft so wouldnt be able to new as indivdual new part
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
3 bolt rrc is strongest ,but std 4 bolt should be all you need
clive thomson
New Member
- Posts
- 28
- Location
- Rosyth,Fife
Hi all.
I take it the adjustment being discussed will take care of any play in the steering ? Will the seal kits available on ebay etc take care of any play as well as my box is leaking a bit ?
I take it the adjustment being discussed will take care of any play in the steering ? Will the seal kits available on ebay etc take care of any play as well as my box is leaking a bit ?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
it may take care if play is in box adjust when box is central as this is tightest point and rock input by hand to feel freeplay been removed,seals can often cure leak as long as shaft isnt pitted
Similar threads
