Ste_Nova's 90

now got seats in the back

IMG_4402[1] by Ste_Nova, on Flickr

I love it! That winch looks beastly!!

broke down on the m6 last saturday, got chucked from lane 1 to lane 3, luckly it was at night, limped it to safer place and had it recovered, took over 8hrs to get it home

anyway, jacked it up and wheel bearing has died, and its took the stub axle with it

the inner bearing is welded to the stub, i managed to get this off with some cutting

Untitled by Ste_Nova, on Flickr

then this with some more but the stub looks dead

Untitled by Ste_Nova, on Flickr

from the damage on the underside of the bit i cut off it looks like the bearing has spun

Untitled by Ste_Nova, on Flickr

ahh well , i washed all the bits

Untitled by Ste_Nova, on Flickr

and fitted new bearing races

Untitled by Ste_Nova, on Flickr

new stub axle on order

Yup, dishwashers make great parts washers....
Suprised you didn't put the disc and hub in with the plates, crockery etc,.
I do.

And it doesn't affect me at all all all all.....

Why would I put plates etc in my parts washer?

Is it a dishwasher dedicated as a parts washer. ?

Cool - and a great idea.

Yep, fitted in the room behind the garage, I do all my tools in it too lol

ouch, glad your all ok mate.

all back together but i killed brake line during removal but didn't realise so had to order some

i decided i needed some carling switches

SteNova said:

i decided i needed some carling switches

Click to expand...

Do you have enough there?

no lol

so today i started on the interior refit
first job was getting to work binning this
Untitled by Ste_Nova, on Flickr

then when i needed a break from sitting in inside i made a new cubby/radio holder, it's done for now and blacked, just need to go to be trimmed
Untitled by Ste_Nova, on Flickr

I like the cubby box mate, did you take any step by step pics?

not really, a sheet of mdf, some scrap ply, jigsaw and a box of screws
I only had to make a new one as the Scooby seats made the old one too low

Im considering scrapping my middle seat for a cubby box and as mine has no radio in it at the moment I think i like the idea of the radio going in front of the cubby box more than the small console above the 12v socket.

its a good location for it, I had to move mine due to fitting a screen in the dash

Did you extend your ariel cable or not bother with one?

good idea that mate

IamRobbie said:

Did you extend your ariel cable or not bother with one?

Click to expand...

I don't use radio much, I get it over 3G on my phone then blue tooth it to the radio, I might put one on the seat bulkhead