Starts but cuts out straight awayl

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Landy-ads

Active Member
Posts
407
Location
Out the front, spanner in hand
Hi people, New problem today, my 200tdi starts but as soon as I let the key go back from the start to ignition position it stops. Seems like its not staying switched on even though the ignition switch is on. Is it likely the switch or is there some sort of solenoid in there that coild be playing up?
 
Hi people, New problem today, my 200tdi starts but as soon as I let the key go back from the start to ignition position it stops. Seems like its not staying switched on even though the ignition switch is on. Is it likely the switch or is there some sort of solenoid in there that coild be playing up?
Do you have a multi meter? You don’t need very much to get the solenoid to fire and stay open. You can do it with a 9v square battery if you are in a bind. So I would check the solenoid feed to see if it has power. If not then check the outputs on the ingniton switch.
 
Back
Top