Idles fine but stalls under load. Have checked EGR valve and replaced injector loom. This is a continuation of my previous thread a few weeks ago. Thought replacing the loom had cured it as it ran fine for a few days. Now having started it after a week the stalling has returned. Any ideas?
Stalling TD5
- Thread starter Lewis07
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
1988smithy
Well-Known Member
- Posts
- 4,048
- Location
- West midlands
Fuel system, hp side of in tank pump, maybe injector seals.
Does it start ok?
Does it start ok?
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
When HP went on one of ours, it was just flat..driveable , but flat...when I changed the fuel filter it would not start. Just kept turning over .
Cheers
1988smithy
Well-Known Member
- Posts
- 4,048
- Location
- West midlands
Hmm, when mine went in disco it kept cutting out under load. Poor starting eventually as well.
Gotta love a td5
Starts and idles fine. Injector seals are new.
Discodevon
Well-Known Member
- Posts
- 1,454
Fuel pump
