Stv123
Active Member
- Posts
- 501
- Location
- derbyshire
Anyone know how to stop squeaky brakes? I put new pads and disks on a while back and it stopped it for a bit but come back again. They are mintex pads which I thought were decent.
Freelander 2 (LR2) squeaky brakes
- Thread starter Stv123
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Rank Amatuer
Well-Known Member
- Posts
- 4,929
- Location
- Scotland
I posted something similar a week or so ago. Advice was a dab of copperslip between pad and cylinder. I used Mintex brake grease: Problem solved.
Stv123
Active Member
- Posts
- 501
- Location
- derbyshire
I did that when I fitted the last set
Rank Amatuer
Well-Known Member
- Posts
- 4,929
- Location
- Scotland
Did you fit normal pads or something hi-tech?
Are your discs excessively worn with too much run-out?
Are your discs excessively worn with too much run-out?
Stv123
Active Member
- Posts
- 501
- Location
- derbyshire
Disks are less than 8000 miles and look fine. Don’t appear to run out and pads were standard Mintex which I’ve never had trouble with before.
I wondered if it might be slide pins? They were ok when I did the disks. In the past I’ve always blamed it on overheated discs but as I say the disks look fine.
I wondered if it might be slide pins? They were ok when I did the disks. In the past I’ve always blamed it on overheated discs but as I say the disks look fine.
