satchmolips
Active Member
- Posts
- 422
- Location
- Worcestershire
Anyone know the colour of the full beam wire on Defender 110 TDi 1990 for me to splice into for spotlights relay??
Spotlight/Main beam
- Thread starter satchmolips
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
SHEDJIM
Well-Known Member
- Posts
- 1,480
- Location
- Wherever I lay my hat.
Yup..... they should be blue, grey and blue, orange, one for each side, think you can splice into them as they come though the bulkhead on the drivers side. check em first with a tester just to make sure.
I spliced into the Blue/White (Blue with a White trace) wire that comes from the Column Flash/Dip Switch, via an additional Illuminated On/Off Switch that I installed in the centre of my dash.
.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
I know this is a real silly question. BUT!! could you not just look at the colours of the wires on the back of the headlamp bulb holder??? :doh:
satchmolips
Active Member
- Posts
- 422
- Location
- Worcestershire
Yes but always good to get the extra tips and experience that comes with the replies! Thanks Guys!
Similar threads
