Classic Spoiler driving lights

Hi guys hope someone can help,,,ive got a spot light out sits in the spoiler of my brooklands,,just wondering how i can change it? cant seem to get at it (spoiler mounting runs directly behind it),,are they accessed from the back? looks like the lens is sealed so i guess so ,,,how are the units actually mounted? any tips /advice be most welcome

Yep, undo panel underneath engine and then you can get at them from the back, or just take the whole spoiler off.

lorri789 said:

or just take the whole spoiler off.

Click to expand...

Not as easy as LR makes it sound in the handbook. I've recently changed a factory spoiler (no knowledge of the Brooklands variant) & it took two of us 3 hours !
I admit that included removing the metal brackets & re-fixing them to the replacement spoiler but allowing for the inevitable rusted bolts the job is no fun
Can you not get at the spotlight fixing bolts from behind? You might find that easier if you remove the wheels, or at least turn the steering to full LH / RH lock.

Yep, plus prepare for a tonne of filth to come down. Watch yer eyes.

The fixings at the ends (into the front wings) are strange expanding thingys, mine just sheared off so were replaced by bolts/nuts. The two large domed set-screws in the centre (holding the # plate on) go into threads in the spoiler, these require a star tool & if stripped then it's another nut 'n bolt job but watch the length as there is pipework behind the valance.

I took me spoiler off and there was three different sized bolts. But they were whitworth, BSF and metric!

norseman said:

Not as easy as LR makes it sound in the handbook. I've recently changed a factory spoiler (no knowledge of the Brooklands variant) & it took two of us 3 hours !

Click to expand...

Hope it was worth it in the end!
Look forward to seeing a photo.