SpenB - 200Tdi Rebuild

Ok folks update time - just fitted the SPL door bottoms and aligned the bulkhead up.
Now obviousley need coming back off to paint ready for the Rocky Mountain tops.

Some are blurd sorry

great build sorry to hear about you're son ,we have diabetes in the family my brother has had it for 30 years ,,,,,,

Thanks Gatso.
He's being fitted with a pump on wednesday - its only filled with a saline liquid for a few weeks or so and the injections will continue till he's happy, the hospital is happy and the pump is happy lol.

Shed repair this week end so no new progress.
Could do with getting it out so i can get a pool table in for the son to practice on. hes in the Scottish Youth Pool Acadamy and progressing slowly but surly. Plus i can get the lads round for a beer free sensibly night of pool - oh wrong hat on there lol

Cheers

Long over due update

Ok done a bit more over the last couple of weeks.

Painted the doors (only the outside though) and fitted. Need the hinges painted.

Fitted new Exmoor trim XS Hood

Finished the carpet off in the front

So at the moment the front end is jacked up so once we start it up i can bleed the PAS.
Just waiting on a slightly warmer day so i can open the doors to let the smoke and smell out.
I have taped up a tube from the exhaust with an extraction fan on the end. i was intending to dump that outside and hopefully the fan will pull the fumes outside. Well thats the intension anyways. lol

Finished!... well, nearly.

Looks good (not too keen on the bonnet ) congratulations on a successful result from a lot of hard work

Cheers, im unsure too now its on but i had it lying around for the past 3 years and was determinded to use everything i told the wife "I need that" when i brought something.
As they say "i dont need it, I want it. But, because i want it, then i need it!" LOL