Sound proofing me 90 & abit of tinting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MaxyMan

Well-Known Member
Posts
2,540
Location
Hampshire
Ello all,

Got fed up of all my work gear getting soaking wet from water dripping off the roof with condensation so thaught would fix it,

Baught a 1.4m x 2m roll of acoustic type sound deadening material similar to what they use for covering parcel shelves and subwoofers and an aerosol spray of contact trim adheasive.

Both items cost under £20 In total.

Cut it all to shape. It did it in two halfs, one passenger side then drivers side and then run a small strip around the middle roof support. In my previous 90 I did it all in one width/piece of fabric and it was very awquardddd to do and found it hadn't got a tight fit around the middle support and separated away.

Anyway, did this about 2 weeks ago odd and seemed to have worked great. Plus it's made the music and subwoofer sound twice as good!

I also found some old bits of closed cell foam like the stuff used for camping roll mats and stuck them to the van sides and all around the seat box, and this has also been great no more tinny type rattle or vibrations.

Ereeee's a few pics...
Also gave me back windows a tint. It looks great and cost under £10 off eBay, was a devil to fit though!!!









Next job is to give the paint abit of a touch up ah thinkk..
 
Maxy that's great well done mate!!

Hope that link works I sent. The tint itself isn't high quality as you would expect for under £10 so you can't use a heat gun on it to shrink the film etc. Any questions send me a pm will try and help!
 

Attachments

  • image.jpg
    image.jpg
    309.3 KB · Views: 177
Back
Top