Snapped Banjo

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

VincentFandango

New Member
Posts
5
Location
Sussex
Hello all

I had the fuel pump off today to fix a diesel leak, and when I was putting everything back together I managed to snap the banjo in the injector pump that secures the fuel return line and the line from the injectors (I think). Wasn't trying to get the bolt Gutentight either!

I've got the broken bit out but even with a bit of googling, the LR parts catalogue and a search of the forum I am struggling to find the part number for a replacement (this is the banjo with a small filter inside it). Could anyone help?

While I'm at it I might as well change all the banjos - I've got ERR886 for the boost pipe, could anyone help with the fuel inlet banjo and the 2 on the fuel filter?

For info it's a Disco 200tdi in a Defender

Thanks!
 
Last edited:
I'm fairly sure the FIP one would be available from a Bosch pump specialist, the others, fuel filter, are available off eBay as I suspect the FIP one might be as well?
Nowt special about them but be aware that the flow banjo bolt has a larger port hole in it compared to the return but the overall dimensions are identical.
 
Thanks for the advice - I've done a bit more digging and found the LR part numbers below for anyone else that comes looking:
STC3597 - Fuel return banjo (the one with the filter in)
ERR1125 - Fuel inlet banjo
ERR886 - Boost banjo
NTC3346 - Fuel filter banjos
 
Back
Top