Snapped Aerial

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

StevenDef90

Member
Posts
29
Location
Medway, Kent
Some idiot snapped off the wing mounted telescopic aerial on my Defender 2.2 TDCI :mad2:

Seen some replacements on Fleabay etc but how do you get the old one off !
Access looks to be a nightmare and the 'nut' on top of the wing looks like it needs a tool to get it off.

Anyone replaced one of these?

I realise I will have to pull through the cable to connect it back to the radio. Unless it's easier to solder a new connector on.

Will have to resort to the coat hanger in the meantime... :(

Any tips?
 
No you're right, it is a nut on the top and you use a 2 pronged socket to remove.
I've got one but you're no where near me so that's out of the window.
But it shouldn't be too tight and a pair of pliers/grips will get it off.
 
Thanks....I may need one of these then....hopefully the pliers will do the job...
 

Attachments

  • 00061-3.jpg
    00061-3.jpg
    30.9 KB · Views: 160
If the aerial is broken then no harm in tapping the top nut around with a hammer and punch, just don't slip and scratch the paint!
 
Yes, that's exactly what I have.
To be honest they aren't tight so you shouldn't have a problem.
Sockets better for tightening them up so you don't mark it, but I'd just put a rag around it and be a bit careful.
But then it depends what sort of new aerial you're buying.
 
Back
Top