Slave cylinder 'C' Clip position 1.8 Petrol

smnbyt · Nov 25, 2013

Is this in the correct position??? or should it be the other side of that tab???

You can actually wiggle the slave cylinder quite a lot....

Brack · Nov 25, 2013

Thats how mine fits

Brack · Nov 25, 2013

A pic of another one on here

http://www.landyzone.co.uk/lz/f9/freelander-clutch-bracket-cylinder-help-113503.html

smnbyt · Nov 25, 2013

Was just looking at that, I think mine has slipped round about 45 degrees or been put on incorrectly, What do you reckon??

Brack · Nov 25, 2013

See what you mean now the front plastic lugs look wrong against the metal bracket lugs.
Just take off the clip and slide out the cylinder and refit it - the position of the cylinder in the bracket is more or less determined by the hyd pipe.

smnbyt · Nov 25, 2013

I might replace the bracket & C clip while I'm at it, Thanks for your input

smnbyt · Nov 26, 2013

repositioned everything as it should be, the slave cylinder doesn't wiggle as much now, So all good.

However I think it is a half arsed flimsey effort on land rovers part.......

Slave cylinder 'C' Clip position 1.8 Petrol

smnbyt

Active Member

Brack

Well-Known Member

Brack

Well-Known Member

smnbyt

Active Member

Brack

Well-Known Member

smnbyt

Active Member

smnbyt

Active Member

Similar threads