andyfreelandy
Well-Known Member
- Posts
- 5,999
- Location
- Devon
Found these. I took a 3 Door FL1 sill which I made some cross section photos from.
Maybe useful for rust proofing and wax injection.
Note that the grommet in the rear wheel arch covers the back end, the plastic door trim screw mounts get you into the outer sill and the cable loom mount holes get you into the inner sill.
@kernowsvenski please note and work out where to squirt wax for best effect !!
The fuel can is for the rather large disc cutter that made these photos possible !!
Maybe useful for rust proofing and wax injection.
Note that the grommet in the rear wheel arch covers the back end, the plastic door trim screw mounts get you into the outer sill and the cable loom mount holes get you into the inner sill.
@kernowsvenski please note and work out where to squirt wax for best effect !!
The fuel can is for the rather large disc cutter that made these photos possible !!
