edessex
New Member
- Posts
- 90
- Location
- Nr. Stansted Airport, Herts
Will there be enough room in a standard 20ft shipping container to work on a 110?
I need to do a bulkhead replacement...
I need to do a bulkhead replacement...
Shipping Container as a Workshop?
- Thread starter edessex
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
AlbertDefender90
Active Member
- Posts
- 955
- Location
- Ellesmere, Shropshire
Might be a squeeze
Station House
Well-Known Member
- Posts
- 3,960
- Location
- Fife, Scotland
If you've room to open both doors, I'd say yes
- Posts
- 10,639
- Location
- Oxfordshire
i don't think you can open both wing mirrors
edessex
New Member
- Posts
- 90
- Location
- Nr. Stansted Airport, Herts
Yeah the doors would have to come off before it went in...
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
AS long as you don't have to take the tyres off or walk down the sides. Being a skinny as a tooth pick will help
Inside width is about 96 inches. how wide is the body of a 110 outside of tyre to tyre
Inside width is about 96 inches. how wide is the body of a 110 outside of tyre to tyre
- Posts
- 10,639
- Location
- Oxfordshire
edessex
New Member
- Posts
- 90
- Location
- Nr. Stansted Airport, Herts
Hmmm... about a foot a side, might work...
edessex
New Member
- Posts
- 90
- Location
- Nr. Stansted Airport, Herts
Do you guys think its doable?
The other option is to get a garage to do it...
The other option is to get a garage to do it...
Ltwt Hybrid 300tdi
Active Member
- Posts
- 271
- Location
- Narrowboat, near Ely in the Fens
I had a container as a motorbike workshop/garage, but I think its going to be very tight room wise for a landy!
bugmania
New Member
- Posts
- 176
Ive got a 20ft container with my vw beetle in and its tight working on it! i wouldnt want to work on a landy in one 
bugmania
New Member
- Posts
- 176
the passanger side is tight up against the side in this one \/\/\/
hope that helps
edessex
New Member
- Posts
- 90
- Location
- Nr. Stansted Airport, Herts
So, looks like its gonna have to go to a garage then... better mortgage my kneecaps!
bugmania
New Member
- Posts
- 176
where abouts are you? im fairly local to the airport
matchmetisse
New Member
- Posts
- 349
- Location
- rugeley staffs
I did mine outside under a gazebo!As in my picture.
edessex
New Member
- Posts
- 90
- Location
- Nr. Stansted Airport, Herts
I'm in the middle of Bishops Stortford, got no garden or driveway to do it on. I would do it on my yard/smallholding, but I had a landy parked up on that before and the council made me get shot of it. So can't do it there either...
bigvinnie
Active Member
- Posts
- 748
- Location
- Catterick North Yorkshire
I had to place a load of snatch landrover's into shipping containers to bring them back from Iraq,
Don't even try it no room for movement, for stowage yes but not for work!
Don't even try it no room for movement, for stowage yes but not for work!
- Posts
- 10,639
- Location
- Oxfordshire
bugmania
New Member
- Posts
- 176
