Setting Blocks

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

tarphenry

Well-Known Member
Posts
1,540
Location
bury lancs
Hi, if I make the setting blocks from 30mm dia steel ,I dont need to have to machine the fancy shapes ,do I ,as the steel will stand the load .Any help would be appreciated.
 
I've set some blocks and surprisingly in a straight ish line.
IMG_20161027_130133861.jpg
 
Hi all, I managed to produce a set of "calibration" blocks from a 32mm broom handle, worked perfectly and suspension is all good now. Thanks again
 
Back
Top