tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
Hi, if I make the setting blocks from 30mm dia steel ,I dont need to have to machine the fancy shapes ,do I ,as the steel will stand the load .Any help would be appreciated.
Setting Blocks
- Thread starter tarphenry
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
What are setting blocks ?
blue beasty
Leaks an prone to bits dropping off
- Posts
- 64,726
- Location
- Gloucestercotshirewolds
Blocks for setting
Flossie
Well-Known Member
- Posts
- 11,356
- Location
- Shropshire
I've set some blocks and surprisingly in a straight ish line.
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Which model RR are you talking about?
Plus, where did you hear about setting blocks?
Cheers
Plus, where did you hear about setting blocks?
Cheers
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
And we are off and running ....
biketeacherdave
Well-Known Member
- Posts
- 5,004
- Location
- south east london
No you don't a little research will find some one else who made his own.... I'm looking I'm looking hold on.....
- Posts
- 58,170
- Location
- Preston Lancs.
http://p38arover.com/rover/p38a/LRT_60-003.pdf
Above for use with T4. Dimensions for every height are in my EAS How to. For use with other diag.
Above for use with T4. Dimensions for every height are in my EAS How to. For use with other diag.
biketeacherdave
Well-Known Member
- Posts
- 5,004
- Location
- south east london
- Posts
- 58,170
- Location
- Preston Lancs.
Look in my EAS how to for proper sizes.
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
Thank you all for your help and amusement.I now understand what I need to do. thanks again
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
Hi all, I managed to produce a set of "calibration" blocks from a 32mm broom handle, worked perfectly and suspension is all good now. Thanks again
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
nice work, the only job i would get away with using a broom handle for on mine would be kindling 
Similar threads
