RANGE ROVER TD6
New Member
- Posts
- 33
- Location
- SUFFOLK
Hi i am going to service my TD6 range rover myself but is it possible to reset the service warning light myself or is it a dealer job? thanks John.
Service warning light
- Thread starter RANGE ROVER TD6
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Voguely
New Member
- Posts
- 193
You will need a diagnostic tool to do that. Dealer/Indy service place would be one way but I guess they would want to charge you something for the privilage unless you are particuarly charming! Or if you can find an individual with one then they should be able to do it too. There are a few people on here with such tools (I'm not one of them I'm afraid!).
eightinavee
Well-Known Member
- Posts
- 3,956
- Location
- UK.
Up to 2006 you dont need a diagnostic tool,just press and hold the LH trip button while you turn the key to position 1.After about 5 secs the display will show SIA reset,from there you are on your own as I cant remember the exact proceedure,I do have it written down on a document from LR at my workshop.I think you then release and then repress that button for a further 5 secs - something like that,you'll just have to fiddle around till you get the right combo.You cant do any harm.
LR never got round to doing the software to enable Testbook to do it.
LR never got round to doing the software to enable Testbook to do it.
RANGE ROVER TD6
New Member
- Posts
- 33
- Location
- SUFFOLK
Thanks for that, i will give it a try.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
