1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Series seat box

Discussion in 'Series Land Rovers' started by Jamesbil, Nov 27, 2011.

< Previous Thread | Next Thread >
  1. Jamesbil

    Jamesbil New Member

    Joined:
    Sep 21, 2010
    Posts:
    203
    Likes Received:
    0
    Location:
    Ireland
    Hi all, quick info needed,
    Will a seatbox from a 110 defender fit a series3?
    I can get a free one locally, or travel for 3hrs to buy one from a series for 40 quid.

    Thanks
    James
     
  2. jamesmartin

    jamesmartin Well-Known Member

    Joined:
    Dec 8, 2010
    Posts:
    89,057
    Likes Received:
    17,395
    Location:
    louth lincs
    basicall yes but tunnel fitting is a little diffeent
     
  3. Jamesbil

    Jamesbil New Member

    Joined:
    Sep 21, 2010
    Posts:
    203
    Likes Received:
    0
    Location:
    Ireland
    need a bit of a mod round the tunnel? is the cut out on the seatbox too small or big?
     
  4. Jamesbil

    Jamesbil New Member

    Joined:
    Sep 21, 2010
    Posts:
    203
    Likes Received:
    0
    Location:
    Ireland
    ok, much later I know, but here is what I did last week!

    Stripped out the series seat box, took off the sides and the back angle, they were well rotten!
    Took apart the 110 box but left the sides attached to the back angle.
    Attached this to the series part for a perfect fit! Even the holes on the rear tub match up, hadnt changed in over 20 yrs!!
    This was much less work than making the 110 box fit, I would have had to swap all the seat runners, mod the boxes and the tunnel box, handbrake hole, and add the lid clips.
     
  5. ciderman

    ciderman Active Member

    Joined:
    Oct 1, 2007
    Posts:
    721
    Likes Received:
    41
    Location:
    sunny worcestershire
    Hallo
    do you think that a battery box and unders seat tool box from a 110/90 will fit a series 2a?
    thanks
     
< Previous Thread | Next Thread >