series 3 swivels - is it possible to refurbish swivels, Pt No. 539741
- Thread starter echo11
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,517
- Location
- west wales coast
Bearings and bush's yes. Chrome repair another matter although minor pitting by filling with an epoxy resin and will last if done right. [well prepared clean surface.]
steve2286w
Well-Known Member
- Posts
- 5,133
- Location
- monkeyangerland
Britpart ones are decent, think they make them to genuine spec and prob sold with G at end of part number
Are britpart making chrome wones again now? There was a time where they only did the teflon ones, although they are reasonable and I have had no problems with them on my 110.
steve2286w
Well-Known Member
- Posts
- 5,133
- Location
- monkeyangerland
I got my chrome ones 7 years ago , still good, I looked on the Britpart website and they show both the Teflon ones and chrome, wonder now the Teflon ones last
10 years and counting on my 110 with nearly 200k miles on them. So I would say the Teflon lasts pretty well!
steve2286w
Well-Known Member
- Posts
- 5,133
- Location
- monkeyangerland
That is good lasted longer than my frying pan 
and that don’t go very far at all
and that don’t go very far at all
- Posts
- 24,471
- Location
- In the next Glen
That is good lasted longer than my frying pan
If you'd stop being a Freelanderer your misses would stop knocking you about with it & the pan will last longer.
