Series 3 door sill 1983

Ramraider · Sep 27, 2017

Hi All,
Paddocks are selling a door sill (AJL710020} so i phoned them today to see if it will fit my series 3 1988 landrover, i was told it was for a defender.
So i looked up my manual to get another number, and i found (330380) which turns out to be obsolete.
The one paddocks are selling looks very close, but the guy on the other end of the phone said "he has no mechanical knowledge"
So here i am asking if anyone has used the defender sill on there series 3 landrover

regards

Turboman · Sep 27, 2017

Ramraider said:
Hi All,
Paddocks are selling a door sill (AJL710020} so i phoned them today to see if it will fit my series 3 1988 landrover, i was told it was for a defender.
So i looked up my manual to get another number, and i found (330380) which turns out to be obsolete.
The one paddocks are selling looks very close, but the guy on the other end of the phone said "he has no mechanical knowledge"
So here i am asking if anyone has used the defender sill on there series 3 landrover

regards

No. But I can't see they are going to be different. S3 and Ninety/One Ten bodies are pretty similar. The axles are wider, hence the wheel eyebrows, so the wheels don't stick out from under the body.

Big Sandy · Sep 27, 2017

Is that the sill with the seal that the floor bolts to, or the body work sill? I can't remember the part no.s, and too lazy to get up and look in the book...be fair, its in the other room.

If the body work one, have a look at sp landrovers, they have them, and pretty much the same price. They might have the floor/door sill too, I didn't look for them at the time.

DarrenHS3 · Sep 27, 2017

i've seen the (structural) sill rail for sale somewhere, galvanised. need to try and think where. would be YRM, or sp4x4 or bits4landy, or pegasusparts

Land Raver · Sep 27, 2017

I bought my galvanised steel U sill channels from YRM Metal and the outer bodywork sills from SP Landrover. Good news was that they fitted fine...At least they did 4 years ago.

cornish rattler · Sep 27, 2017

Think the bit under the door is the same but the bit that fits to the front wing is slightly longer so don't think that will fit and the bit that fits the rear wing I'm not sure about as I can't remember if they are the same or not

Ramraider · Sep 28, 2017

thanx all . will give the defender ones a try and let you know the outcome

Bobsticle · Sep 28, 2017

cornish rattler said:
Think the bit under the door is the same but the bit that fits to the front wing is slightly longer so don't think that will fit and the bit that fits the rear wing I'm not sure about as I can't remember if they are the same or not

Big ruddy help you are

I didn't know 3s had a sill, apart from a bit of angle and the external strip of brimmerbright.

cornish rattler · Sep 28, 2017

Bobsticle said:
Big ruddy help you are

I didn't know 3s had a sill, apart from a bit of angle and the external strip of brimmerbright.

Just happy to help

DarrenHS3 · Sep 28, 2017

https://yrmit.co.uk/product/lhs-sil...defender-90-or-110-van-series-swb-or-lwb-van/

https://yrmit.co.uk/product/rhs-sil...defender-90-or-110-van-series-swb-or-lwb-van/

LordOWar · Sep 29, 2017

I will need a set of these as well. You should see the state of mine

I do wonder some times if I am just trying to see if it possible to post an entire landy.

Rubins4 · Sep 30, 2017

Apparently back in the day one of the chaps on the range rover production line was stealing a classic rangie, one piece at a time. He had 2/3's of a complete vehicle at home.

I guess he had to if made it out the gate with some fairly large parts, the mind boggles.

Series 3 door sill 1983

Ramraider

Member

Turboman

Mab An Gov

Big Sandy

Active Member

DarrenHS3

Active Member

Land Raver

Well-Known Member

cornish rattler

Well-Known Member

Ramraider

Member

Bobsticle

De Villes Advocaat

cornish rattler

Well-Known Member

DarrenHS3

Active Member

LordOWar

Well-Known Member

Rubins4

Well-Known Member

Similar threads