Series 3 Axel Pinion Seal

Partington7928 · Jun 27, 2016

Has anyone got any experience or know someone in the Manchester area / NW who could change an pinion seal on a axel?? I've got limited experience / tools

Any comments / advice is appreciated

Thanks James

jamesmartin · Jun 27, 2016

its just a matter of removing prop ,split pin then pinion nut ,pulling of flange and prising seal out frc8220, fill the inner side with grease to hold garter spring in place and tap seal home a large socket helps for that fit flange tighten nut and refit split pin

ronsealdeath · Jun 27, 2016

I put 2 screws in my old seal to help pull it out, saves scuffing something by prising it out.easy job have a go

Partington7928 · Jun 28, 2016

Guys,
Thanks for the reply's I'll have a go! and just to confirm, that is it best to go to land rover for the seal? or would a Bermach or Equal do?

Thanks again

John S · Jun 28, 2016

Bugger land rover. Go to an independent dealer like Craddock or Paddocks. They all supply Bearmach or equivalent aftermarket.

Series 3 Axel Pinion Seal

Partington7928

Member

jamesmartin

Well-Known Member

ronsealdeath

Sagging Member

Partington7928

Member

John S

Well-Known Member

Similar threads