series 2a 3 clutch which do i need!

hi, hope some one can help me!
im trying 2 put a late ex mil series 3 engine 5 bearing in my 2a witha 2a gearbox, i dont know what clutch to use as ive had different answers off every one, some people say a 2a others a 2a diesel, and others a series 3!
can any one help me or know of a web site i can go on 2 confirm this!
cheers
fred

re: your sposed ta use a full series 3 clutch set up for wot your saying yer doin ,unless yer a cheapskate then ya can use yer 2a friction plate and cover plate which ya shud allready av and a series 3 release bearing but if ya do this you need to extend your slave cylinder push rod to around 4 an arf inch and ya gorra extend ya clutch pipe from ya master cylinder ta reach the slave cylinder on other side,av fun
drippy

so what yar saying is if i get a series 3 clutch kit thats all ill have to do?
cheers
fred

is e speakin to imself??

fook jus read it propa heheeeeee use a series 2a clutch

Use the clutch to match the gearbox. A series 3 clutch will not work with a 2a release mechanism.