dandit1200
Active Member
- Posts
- 213
- Location
- worcester
New spring mount and more rot to deal with its comong on .hoping to paint it this week and get the axels fitted
series 2a 109 recovery truck
- Thread starter dandit1200
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jam1
Well-Known Member
- Posts
- 1,315
- Location
- Staffordshire
There's certainly some interesting err "welding" for lack of a better description gone on their.
Just read this from the top - great thread and great project - watching ( with interest 
)
Have you heard of cold metal stitching ?? - well, I think that might be "luke warm" metal stitching- its probably got just about enough strength, but it looks appalling... and to think the Japs used to get criticised for their "pigeon dropping" welding on bike frames in the 70's
)Have you heard of cold metal stitching ?? - well, I think that might be "luke warm" metal stitching
- its probably got just about enough strength, but it looks appalling... and to think the Japs used to get criticised for their "pigeon dropping" welding on bike frames in the 70's
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
Hi there suzuki didn't do much better in the late 90s as testament to my bike I got a bandit mk1 1286cc bad boy thing!!! And I love it just like my landy hahahaJust read this from the top - great thread and great project - watching ( with interest
Have you heard of cold metal stitching ?? - well, I think that might be "luke warm" metal stitching
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
Stupid phone didnt mean to load same pic over an over.
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
so what do you think of my new rigger i made ?mine is the one above the bottom one is what i cut off
Jam1
Well-Known Member
- Posts
- 1,315
- Location
- Staffordshire
Haha yeah there is no way I mistook the bottom one for your work. Infinitely better
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
if a jobs worth doing its worth doing right .it takes time and pactiance but well worth it and the satisfacton we get from doing it is even betterHaha yeah there is no way I mistook the bottom one for your work. Infinitely better
cheers for all replys guys i do read them all
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
i going to hopefully weld the hanger in tomoz after i cut the rotton part out of the chassis and replace it with new steel then weld the fresh spring mount in .i have already made the top of the spring mount out of 6 mm steel so i know its strong
Amen, My grandfather used to say - "Do it nice, or do it twice" - it's engraved into my memory....if a jobs worth doing its worth doing right .it takes time and pactiance but well worth it and the satisfacton we get from doing it is even better
used to be a biker myself - a full power V Max - love the thing. My health is too bad now,
unfortunately, but still love bikes
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
Hi there sorry to hear about your bad health I see you like proper bikes thenused to be a biker myself - a full power V Max - love the thing. My health is too bad now,
Thanks. Much appreciated.
I love proper bikes
I have still have the V Max - not ridden it in 14 years unfortunately I just keep looking after it. i really should sell it... but its quite hard to do that.....
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
hahaha well spotted there is also an outrigger to replace .we had some issus with a leaky roof on workshop an the chassis was starting to rust so we decided to put a coat of paint on.the rear bumper will be fitted when we line the rear tub up .the rear end has been rebuilt completly all rot cut out .
Last edited:
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
uh would be embarrasing mistake hahahaGlad you've noticed as well
dandit1200
Active Member
- Posts
- 213
- Location
- worcester
Axel and diff cleaned
ProcrastinatorFraser
Active Member
- Posts
- 771
- Location
- France
Just read through this fred, i was hesitant about building a new X member, but a bleedin chassis?? the best bit of metal work i've ever done was this!!
