series 2 questions
- Thread starter TD5power
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
I think;
dark green is bronze
blue is duck egg I think
light green unsure
As to the blanks just make your own
dark green is bronze
blue is duck egg I think
light green unsure
As to the blanks just make your own
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
by measuring metal cutting it to size and bending it ? :doh:
If not google, YRM probably have them
If not google, YRM probably have them
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
you wont get a perfect curve, other option is to blank off the light area, fill with chem metal then sand flush
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
depends what year it is
muscrat
Active Member
- Posts
- 224
- Location
- south wales
If i remember correctly lights moved into the wings in 1968 with the series 2a model this then became the norm for the later series 3.
muscrat
Active Member
- Posts
- 224
- Location
- south wales
Probably 1967, whats on your logbook.
muscrat
Active Member
- Posts
- 224
- Location
- south wales
if it's a 2a then the h/lamps will be in the wings and the grille/ radiator panel will have no headlamp bowls and a full metal mesh grille.
- Posts
- 10,639
- Location
- Oxfordshire
I've got a spoon if it helps
NiteMare
New Member
- Posts
- 836
- Location
- Birmingham
that's a rather confusing answer ^^
2a's up to i think 1969 had thier headlamps in the radiator panel ('66 definitely did)
new flat fronts for the wings might still be available but they're damned expensive from what i've heard/read which doesn't surprise me due to the folds/curves in them, YRM might be able to supply them but i'm not sure
you will find the light spread isn't as good when you put the lights back in the rad' panel so you might want to invest in a pair of H4 units to compensate (i use H4s in my rad' panel)
V8jon
Well-Known Member
- Posts
- 1,439
- Location
- Pembrokeshire west Wales
What front panel is on it? If its a s3 you can't just fit headlamps to it as its different from the s2a (no holes for the headlamp bowls)
As for making the front part of the wing all I've done in the past is keep the s3 one in place and cut a piece of aluminium to shape,cut out the holes for the sidelights/indicators and fix it over the top as neat as possible,you only need to bend the top bit then to fit the curve at the top of the wing.
As for making the front part of the wing all I've done in the past is keep the s3 one in place and cut a piece of aluminium to shape,cut out the holes for the sidelights/indicators and fix it over the top as neat as possible,you only need to bend the top bit then to fit the curve at the top of the wing.
Similar threads
Series 1
86" seatbox
