Sender unit
- Thread starter Harry5455
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Gmacz
Well-Known Member
- Posts
- 968
- Location
- Forfar/Dundee
zeaphod
Well-Known Member
- Posts
- 3,103
- Location
- Belfast, Norn Iron
As above, SP have a range, but there are early Disco 200s that are not covered. The threads on these are fine metric, I had to buy a die and make my own. I have a spare somewhere if you don't have any luck with the pre-bought. Do you know what year the engine is?
zeaphod
Well-Known Member
- Posts
- 3,103
- Location
- Belfast, Norn Iron
Here's my thread on the subject:
https://www.landyzone.co.uk/land-ro...re-sender-threads-thread.311325/#post-3924879
https://www.landyzone.co.uk/land-ro...re-sender-threads-thread.311325/#post-3924879
zeaphod
Well-Known Member
- Posts
- 3,103
- Location
- Belfast, Norn Iron
Iirc, it was just a matter of pliers and force. It's just nylon.
