Seized hand accelerator
- Thread starter Hedgy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 66,670
- Location
- The Wooly Witch
- Posts
- 66,670
- Location
- The Wooly Witch
- Posts
- 66,670
- Location
- The Wooly Witch
Or
Dry cable connection to the carburettor? They don't get used often! Check the linkage all the way, liberal WD40. I move mine occasionally to ensure it's working. My MOT garage use it as a surrogate choke, which is annoying when you start and don't know it's set. Q - do you really need it? It's an optional extra which is an artefact of vehicle order. Always think it's a silly feature unless it's justified by a reason for static work. Bit pointless if there's no PTO to justify a static choke let alone an oil cooler. So, why keep it? Authenticity and vehicle provenance 
?
?
tottot
Well-Known Member
- Posts
- 7,542
- Location
- west wales coast
The person who decided that down by the passenger footwell [series three] was the place for the hand throttle must have had a weird sense of humor.
We always used to mess about with that - wind up the duty driverThe person who decided that down by the passenger footwell [series three] was the place for the hand throttle must have had a weird sense of humor.
pete1987RRC
Well-Known Member
- Posts
- 5,136
- Location
- East Midlands
Yep, great cruise controll system, used mine al the time.
I've managed to get it off its seized solid, I'll get some heat on it see if that does the job!
- Posts
- 66,670
- Location
- The Wooly Witch
If not, a replacement is not over expensive ...
Got it going in the end I had to take it to pieces, it was always handy if I wanted to jump start another vehicle if there was nobody else at hand, we had a similar thing on the old Bedford TK,and on a man 8150, beats looking around for something to jam on the accelerator.
