second hand conrod?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

chris freestone

Active Member
Posts
116
hey guys just a quick question here, currently in the process of changing out a bent conrod in my 200tdi after hydrolocking.... was just wondering if there is any problem with using a second conrod as a replacement or does it have to be a brand new one? just wondering if the way the bearings ware on the rod would cause a problem here?

thanks:)
 
actualy while im thinkin bout it..... shells, is it better to replace with new ones or reuse the ones already there because that have worn with the crank?
 
I used a second hand one a few months ago when I repaired mine after a hydrolock. I replaced all the bearings while it was apart.
 
I fitted a second hand rod to a 110 Tdi just before christmas with no issue,actually the worst bit was getting the bent rod out,it wouldn't go up through the bore without some "modification".
 
You must log in or register to reply here.

Similar threads

Defenderbender130
Reversing light
Replies
3
Views
716
Defenderbender130
Defenderbender130
A
Castor issues
Replies
1
Views
267
Pawl
Pawl
W
200 Tdi crank damper mount shot - what to do
2
Replies
38
Views
2K
wileycat
W
I
Automatic Gearbox and hand controls.
Replies
3
Views
675
Stanleysteamer
Stanleysteamer
O
wheel bearing questions
Replies
4
Views
828
Ollie_Mif
O
Back
Top