seat switches

M

mark taylor

New Member

Posts

5

• Apr 27, 2009

• #1

I have Disco 11 facelift. Non memory electric seats does anyone know were I can get the seat control switches new or sh at a reasonable price the drivers is beyond repair.
many thanks .Am new to forum so is there a parts section for this or am I in right place.

 

Series71

Space man

Posts

17,374

Location

Dorset

• Apr 27, 2009

• #2

is this what you're looking for ?

LAND ROVER DISCOVERY SERIES 2 ELECTRIC SEAT SWITCH N/S on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end time 28-Apr-09 15:51:28 BST)

 

M

mark taylor

New Member

Posts

5

• Apr 28, 2009

• #3

Thanks for the replies and the good music link. That ebay switch is different to mine dont know if it would fit.Have emailed the other link as search did not come up with switches.Mine is the same as the range rover you can change the facia plastic that holds it in place.Is it the same as the disco 3 non memory seats ? They have different style nobobs but look the same I dont know if the back connectors are the same .Still looking if anyone can help.
many thanks

 

R

RichyMondy

New Member

Posts

37

• Apr 29, 2009

• #4

Mine are shot as well. A company called Mansfield 4x4 in Manningtree, Essex can do the backing plates new for £12.50 + vat...

I'll be getting some when i get paid!

 

adrian hollister

Active Member

Posts

132

Location

Bodmin Moor

• Apr 30, 2009

• #5

I've taken mine apart and cleaned. It's not a job for the faint hearted as there are small ball bearings and springs in there. The actual internals of the switch are quite basic if it's the same one - loads of potential for arcing when switching so all the contacts become fouled. A bit of emery cloth action later and it's back to fully working. I will warn you thought that the bits inside are a pain to put back together, but if it's buggered you've nothing to loose

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

Posts

83,296

Location

Embasinga stocæ

• Apr 30, 2009

• #6

tip for dirty contacts - dont use emery - use one of those green ink erasers - does the job just as well and doesnt leave gritty contaminants.