seat conversion

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Anything will fit it you have the time and patience ;)

IIRC when we used to convert vans for camper conversions, etc... they used to have to be done by a company that would issue a certificate for the insurers and whoever else took interest.
 
Difficult one this.
Custom says no, but as stated above, anything is poss if yu throw enuf money and effort at it.
Those who have tried say all the rear trim needs to be replaced and locking parts have to be fitted thru the floor etc.
Deffo not an easy thing to do, by all accounts.

The ad does say 1999>
 
The ad does say 1999>


Hence the question:D sounds like a challenge! might have to give it a go just so I can post the results

Think I'll ask for measurements of the seat bases as these seats are in the Disco 2 as far as I've seen all the dimensions are still pretty much the same as the Disco 1 and I'm pretty sure the Trim will cross over with a bit of jiggery pokery.

I just dont want to have to cut the arches etc just to get the buggers in!
 
Back
Top