Seat change to non Air bag
- Thread starter Philfrax
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
Two threads for the same subject is never a good idea.
I can provide you with details of how to make a doofer to fool the SRS ECU, or I can make them for you. PM me for details. The side airbags are useless, I disconnected mine after one went of and knackered the drivers seat.
I can provide you with details of how to make a doofer to fool the SRS ECU, or I can make them for you. PM me for details. The side airbags are useless, I disconnected mine after one went of and knackered the drivers seat.
- Posts
- 58,170
- Location
- Preston Lancs.
2.2 ohm resistor across the plug.
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
I don't know where you got 2.2 ohms from Tony but that would not work on either of mine under test.
- Posts
- 58,170
- Location
- Preston Lancs.
Common to BMW other ratings are available for little money.
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
Ah, I din't write that very well, so you misunderstood, 2.2 ohms did not work. Making the correct value up from resistors is I'm sure cheaper than BMW prices.
- Posts
- 58,170
- Location
- Preston Lancs.
2.2 ohms is the value quoted as being suitable for P38 1994 to 2002. I know no more than that.
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
I never found a figure anywhere when I was looking, so I did it by trial and error with a precision potentiometer.
- Posts
- 58,170
- Location
- Preston Lancs.
They are for sale on Ebay. Various values for various cars. I have never done it so don't know more than that. Tooling is available pretty cheap to determine the correct value needed.
Similar threads
Disco 4 (LR4)
air bag
