Saggy back end!

I have been running through the amigos check on my D2

I had all the connectors out under the dash (left side) slabs and the other ecu beside it

Sprayed them all with elecrical cleaner, put them back in, and the air suspension depressurised and is now flat on its arse, wont lift when asked, and a light with a side shot of the car with an up and a down arrow beside it is lit beside the hill descent light

Ignition was off.

Is there any way of resetting the Air bags, or am I in trouble?

Thanks

The system won't pressurise if any of the doors including the back are open or not closed properly.

Try closing all the doors and then starting the engine

Sorted

Thanks Biggeeee!

Simple fix, if you know how!

next time when you 'play" with the SLABS ECU disconnect the battery too cos it's SLS part stays live a while after the ignition is off