simon holland
New Member
- Posts
- 101
- Location
- shifnal shropshire
would a safari snorkel for a 200 tdi disco fit a 300 tdi disco, theres an adapter plat to fit a v8 with it also, how much modifing would it take to make it fit
safari snorkel
- Thread starter simon holland
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
battenberg
Well-Known Member
- Posts
- 2,101
- Location
- Birmingham UK
the 200 has a cylinder for the air cleaner, the 300 a flat pannel shoe box.
The 300 safari uses the same hole as the 200 in the inner wing but has a moulding that wraps around the side of the square air box in through a new/seperate hole. The original hole then gets plugged.
Nothing stopping you adding a bit of flexipipe to the 200 snorkel to make it fit, or try to source just the moulded part... I imagine the rest of it is the same...
The 300 safari uses the same hole as the 200 in the inner wing but has a moulding that wraps around the side of the square air box in through a new/seperate hole. The original hole then gets plugged.
Nothing stopping you adding a bit of flexipipe to the 200 snorkel to make it fit, or try to source just the moulded part... I imagine the rest of it is the same...
