Safari snorkel install

Installing my Safari snorkel tomorrow morning.

any tips or any thing I should know?

I will try take some pics as I cant find anything on installing onto a 300tdi.

Thanks.

Make sure you use silicon to seal it to the air intake if you want it to work in water. . And some breather tubes!

Lewis07 said:

Make sure you use silicon to seal it to the air intake if you want it to work in water. . And some breather tubes!

Click to expand...

Thanks,

got the full wading kit that will go on next.

If using silicone get some quality stuff as the cheap stuff just doesnt last, you also need to seal the little rubber dump valve on the air filter housing

Tis nice and easy job. I did mine a couple of weeks ago on a 300tdi defender. I would take your time to get the template lined up correctly. The instructions mention a 16mm hole for the 3 wing holes but 12mm works fine. I used normal bolts on the wing studs whilst I lined up the windscreen frame bolts then use the nylocs when fixing finally.

There is a good vid here from Rugged Guide http://m.youtube.com/watch?v=EDwQfJErVGM